Abstract
The influence of high-temperature organic and inorganic fibrous veils on carbon fibre oxidation and residual properties in carbon fibre-reinforced composites (CFRCs) under fire exposure was investigated. Lightweight nonwoven and woven veils (aramid, polyphenylene sulphide (PPS), basalt, and E-glass) were incorporated as surface and interlaminar layers to provide thermal barrier effects while minimising structural contributions. Composites were exposed to a radiant heat flux of 75 kW m-2 for 600 s, and their thermal, physicochemical, and mechanical responses were evaluated. The results demonstrate that oxidation behaviour is influenced by a combination of veil architecture, thermal stability, and decomposition chemistry. Organic veils decomposed between 300–700 °C and did not form stable protective residues; their decomposition was associated with earlier carbon fibre oxidation and localised surface damage, particularly for PPS. Inorganic veils remained structurally intact and acted as physical barriers. Woven E-glass formed a semi-continuous interlaminar layer that restricted oxygen ingress, reducing carbon fibre oxidation, preserving fibre diameter, and maintaining electrical conductivity. Conversely, nonwoven E-glass was associated with increased oxidation, consistent with its discontinuous morphology. Basalt veils exhibited high thermal stability but showed evidence of internal heat accumulation in multilayer configurations. Mechanical testing showed that single surface veils had minimal influence on structural performance, whereas multiple interleaves reduced tensile and flexural properties due to disruption of the carbon fibre load path. These findings demonstrate that effective fire-resistant CFRC design depends on controlling interlaminar architecture. Incorporation of inorganic layers can provide a viable route to improving oxidation resistance and post-fire structural integrity in hybrid composites.