Abstract
The rapid uptake of energy harvesting triboelectric nanogenerators (TENGs) for self-powered electronics requires the development of high-performance tribo-materials capable of providing large power outputs. This work reports on the synthesis and use of aniline formaldehyde resin (AFR) for energy-harvesting applications. The facile, acidic-medium reaction between aniline and formaldehyde produces the aniline-formaldehyde condensate, which upon an in-vacuo high temperature curing step provides smooth AFR films with abundant nitrogen and oxygen surface functional groups which can acquire a tribo-positive charge and thus endow AFR with a significantly higher positive tribo-polarity than the existing state-of-art polyamide-6 (PA6). A TENG comprising of optimized thin-layered AFR against a polytetrafluomethylene (PTFE) film produced a peak-to-peak voltage of up to similar to 1000 V, a current density of similar to 65 mA m(-2), a transferred charge density of similar to 200 mu C m(-2) and an instantaneous power output (energy pulse) of similar to 11 W m(-2) (28.1 mu J cycle(-1)), respectively. The suitability of AFR was further supported through the Kelvin probe force microscopy (KPFM) measurements, which reveal a significantly higher average surface potential value of 1.147 V for AFR as compared to 0.87 V for PA6 and a step-by-step increase of the surface potential with the increase of energy generation cycles. The work not only proposes a novel and scalable mouldable AFR synthesis process but also expands with excellent prospects, the current portfolio of tribo-positive materials for triboelectric energy harvesting applications.